Home › Mazda › CX-50 › 25V737000
Mazda CX-50 Suspension Bolts May Not Be Tight
high How serious is it? About this label
If a wheel or suspension part comes loose while driving, the vehicle can lose control and lose drive power, which increases the risk of a crash. The notice does not tell owners to stop driving.
Key facts
| NHTSA campaign number | 25V737000 |
|---|---|
| Reported to NHTSA | Oct 29, 2025 |
| Manufacturer | Mazda North American Operations |
| Part affected | Suspension:critical Fasteners |
| Vehicles covered | 1 model/year combination, model years 2025 |
| Do-not-drive advisory | No |
| Park-outside advisory | No |
| Repair | Free at any franchised dealer |
What's wrong, in plain English
Mazda is recalling certain CX-50 and CX-50 Hybrid vehicles because the bolts that hold the front suspension together may not have been tightened properly during assembly. If these fasteners are too loose, a suspension part or a wheel could come loose from the vehicle.
What you should do
2. Contact a Mazda dealer, or call Mazda customer service at 1-800-222-5500, option 6.
3. Dealers will inspect the suspension bolts and tighten or replace them, free of charge.
Where do I find my VIN, and what do I tell the dealer?
Your VIN is the 17-character code on the lower left of the windshield, on your registration and usually on your insurance card. Enter it at nhtsa.gov/recalls to see whether this recall is still open on your car. When you call the dealer, say you have an open safety recall and give them NHTSA campaign number 25V737000. More in how recalls work.
Affected vehicles (1)
Who to contact
Mazda — official Mazda recall lookup
Customer service: 1-800-222-5500
Other Mazda CX-50 recalls
- Jun 18, 2025Mazda CX-50 Airbag May Deploy Improperlyhigh
- Mar 14, 2025Mazda CX-50 Trailer Hitch Bolts May Loosenmedium
- Sep 3, 2024Mazda Camera Fault May Disable Safety Systemshigh
- Apr 18, 2023Mazda CX-30, CX-50 Brake Control Unit May Failhigh
- Mar 1, 2023Mazda CX-50 Trailer Hitch Wiring May Detachmedium
Official notice
- Component
- SUSPENSION:CRITICAL FASTENERS
- Summary
- Mazda North American Operations is recalling certain 2025 CX-50 and CX-50 Hybrid vehicles. The front suspension fastener bolts may not be tightened properly, which can result in suspension component and/or wheel detachment.
- Safety risk
- Wheel or suspension component detachment can cause a loss of vehicle control and a loss of drive power, increasing the risk of a crash.
- Remedy
- Dealers will inspect the front suspension fastener bolts and, if necessary, replace and tighten them, free of charge. Owner notification letters were mailed December 10, 2025. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. The manufacturer's number for this recall is 7925J. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning November 3, 2025.
Verify your specific vehicle by VIN at nhtsa.gov. Recall repairs are free of charge by law.